{"id":37,"date":"2016-03-26T15:47:33","date_gmt":"2016-03-26T12:47:33","guid":{"rendered":"http:\/\/latka24.com\/?p=37"},"modified":"2022-08-29T21:15:46","modified_gmt":"2022-08-29T18:15:46","slug":"instrukciya","status":"publish","type":"post","link":"https:\/\/latka24.com\/en\/about\/instrukciya.htm","title":{"rendered":"INSTRUCTIONS FOR USE"},"content":{"rendered":"

<\/p>\n

<\/div>\n

Basic Liquid Patch Application Recommendations<\/h2>\n
\n

1. The product does not freeze at relative subzero temperatures, but it is still not worth repairing your product at low temperatures. Ideal Liquid Patch works from + 10 \u00b0 C.<\/strong><\/p>\n

2. Application of the second layer (if necessary) of Liquid Patch, on the \u201cfresh\u201d first layer, preferably on a deflated product.<\/strong><\/p>\n

3. After applying the Liquid Patch, the product can be used after 2-4 hours.<\/strong><\/p>\n

4. Degrease the surface to be repaired – this will significantly improve the repair!<\/strong><\/p>\n

5. For the aesthetic side – use electrical tape (masking tape).<\/strong><\/p>\n<\/div>\n

\n
\n
Composition:<\/div>\n
PVC and active agents<\/div>\n<\/div>\n
\n
Application:<\/div>\n
Is applied for PVC articles (inflatable boats, tents, pools)<\/div>\n<\/div>\n
\n
Application method:<\/div>\n
\n

Degrease the surface that is to be repaired. Shake tube content. Apply Liquid Patch layer on puncture (cut, hermetic sealing) spot.<\/p>\n

On cuts over 2 cm, before applying the Liquid Patch, put a reinforcing cord.<\/p>\n<\/div>\n<\/div>\n

\n
Application Recommendations:<\/div>\n
It is recommended to repair the article in a well-ventilated place at temperature not lower than +10\u00b0C and far from direct sunlight.<\/div>\n<\/div>\n
\n
Storage:<\/div>\n
Keep in a cool dark place away from children. Do not apply being close to fire. Is volatile. Freezes at -5\u00b0C.<\/div>\n<\/div>\n
\n
Expiry date:<\/div>\n
2 years after the date pointed out on a tube.<\/div>\n<\/div>\n<\/div>\n

Application Instruction<\/h2>\n